+909 767 0636 +281 254 4438 546 Hofgaarden St. La Puente CA 91744, USA.
+909 767 0636 +281 254 4438 546 Hofgaarden St. La Puente CA 91744, USA.
Calidad Certificada
EN MÉXICO Y EUA
Diseño y Fabricación
CON FACTOR SÍSMICO
Soporte y Garantía
SEGUIMIENTO PUNTUAL
COTIZAR

Medium/Semi-Heavy Load Racks

Medium/Semi-Heavy Load Racks

Storage systems suitable for 1 to 2 tons of finished pallets.

HIGH
DENSITY
MEDIUM
DENSITY
RACK SUPPORTED
BUILDING
MEZZANINE
SYSTEM
CONVEYOR

Storage system whose space utilization is between 80% and 90% of the space, taking advantage of heights and the least amount of aisles possible.

SELECTIVE
DOBLE DEEP
DRIVE
THRU (IN)
PUSH
BACK
PALLET
FLOW
CARTON
FLOW
PALLET
SHUTLE

  • It has a great advantage because the number of aisles is reduced, increasing the load capacity.
  • Static racking that allows direct access to each pallet, streamlining inventory control.
  • Adaptable to any space, weight or size.
  • It is the most widely used storage system in industry and commerce in general.
  • It makes the most of vertical warehouse space.
  • Almost Immediate Access To All Stored Pallets

  • Allows for forklift access to the interior, maximizing space utilization by eliminating aisles.
  • Provides maximum space utilization, using up to 85% of the available surface, this utilization consists of eliminating aisles for maneuvering, since it is designed so that the forklift enters inside the rack.
  • Ideal for storing high volume, low rotation products.
  • Advantages
  • Maximizing space utilization by eliminating maneuvering aisles.
  • Provides higher profitability at lower storage cost.
  • High density of stored products.
  • Allows for inventory control.
  • There are two load management systems: the drive-in system, with a single access aisle, and the drive-through system, with two accesses to the load, one on each side of the rack
  • LIFO (DRIVE IN)
  • FIFO (DRIVE THRU)

  • Accumulation storage system allowing storage of up to 5 bottom pallets per level.
  • All the pallets on the same level, with the exception of the last one, are placed on a set of carriages that move, by pushing, on the top tracks.
  • Ideal for the storage of medium rotation products, with two or more pallets per reference (LIFO system, first pallet in, last out).
  • Facilitates inventories.
  • Resistant to heavy loads.

  • Dynamic gravity system, makes the most of the available cubic space in the storage area.
  • FIFO System (First in, first out),
  • Reduction of forklift personnel and equipment by 30%
  • Maximum storage capacity and excellent stock control
  • Ideal for storing high volume, high rotation products
  • Uses a slightly inclined conveyor so that the pallets move easily by gravity to the opposite end
  • Mainly used for perishable products, but also for the pharmaceutical, chemical and automotive industries.
  • In this storage system, the load moves by gravity on rails with plastic wheels or metal rollers in a safe manner by means of speed controllers placed along the tunnel and down the slope itself. The load is carried smoothly and safely to the end of the rail where it is stopped by a metal stopper. This process is repeated successively until the tunnel is filled.
  • FIFO

  • Product rotation system (FIFO system).
  • Large number of references on the front of the racks. Avoid interferences in the tasks of replacement and picking of material.
  • This system is used for manual storage of medium and heavy loads, increases product diversity, saves space and speeds up picking maneuvers.
  • Rollers adjust to your needs, optimizing material infeed and outfeed.
  • Reduced order picking time and no energy consumption.
  • FIFO

  • Compact pallet storage
  • Uses motorized shuttles to automatically transport loads to the rack.
  • Reduced maneuvering times
  • With deep storage lanes, forklifts no longer need to travel beyond the shipping dock and entry lane.
  • WI-FI controlled
  • 0 risk of damage to equipment and operating personnel
  • Collision Risk Free Storage
  • The Pallet Shuttle follows operation commands from a Wifi connected tablet, storing the load in the first free position in the channel..
  • Powered By A Rechargeable Lithium Battery.

Storage system adaptable to different needs taking into account FIFO and FILO system, the space utilization is 60 to 70%.

SELECTIVE RACKING
CANTILEVER

  • Static rack that allows direct access to each pallet, streamlining inventory control.
  • Adaptable to any space, weight or size, it can be combined with other systems.
  • It is the most widely used storage system in industry and commerce in general.
  • It makes the most of vertical warehouse space.
  • Immediate Access To All Stored Pallets

  • Perfect system for the storage of long loads. Great simplicity and resistance, easy assembly.
  • System specially designed for the storage of long or variously sized unit loads such as bars, profiles, timber, pipes and tubes, etc…
  • Mostly manual handling of the product
  • It is characterized by a structure composed of columns and a series of cantilevered arms on which the load is deposited.
  • Levels are placed on one side or on two sides.
  • Advantages
  • Perfect for the storage of bars, profiles, timber, pipes and tubes, etc…
  • Very simple and resistant structure.
  • Cargo handling can be done manually for light loads or by forklift for heavy loads.

  • In this system the racks themselves are part of the construction system of the building, so that the height of these warehouses is only limited by the height of the building itself, saving time since it also allows us to eliminate civil works and also allows us to move the entire warehouse..
  • The rack is part of the building’s construction system.
  • This system is recommended when there is a need to build a warehouse in a short period of time.
  • Any type of product can be stored.

  • 100% removable metal structures that double or triple the useful surface of a warehouse or work areas, including offices.
  • Fast, simple and clean assembly.
  • The mezzanine is a storage system that allows us to double the usable area of a warehouse, to have more space, since it takes advantage of the height of the warehouse.
  • This use of space can be used to increase storage areas as well as work and office areas (depending on the space needs of the company), since this system allows us to obtain a second floor inside the
    warehouse.

  • They are specially designed so that our customers can move any type of material thanks to the force of gravity, or by a force applied by a person. These systems are fully adaptable to your needs and the type of material you wish to transport.
  • Advantages
  • Allow the transport of materials over long distances.
  • Does not alter the transported product.
  • Increases the amount of production.
  • Moves the load by gravity, usually down an incline or by a person pushing the load along a flat conveyor.
  • Fully adaptable to your needs and the type of material to be transported.
  • Increases productivity.

Medium/Semi-Heavy Load Racks

HIGH DENSITY

CARTON FLOW

Medium/Semi-Heavy Load Racks

MEDIUM DENSITY

SELECTIVE RACKING

Medium/Semi-Heavy Load Racks

MEDIUM DENSITY

SELECTIVE RACKING

Medium/Semi-Heavy Load Racks

HIGH DENSITY

CONVEYOR

Medium/Semi-Heavy Load Racks

MEDIUM DENSITY

SELECTIVE RACKING

Medium/Semi-Heavy Load Racks

HIGH DENSITY

CONVEYOR

Medium/Semi-Heavy Load Racks

MEDIUM DENSITY

SELECTIVE RACKING

Medium/Semi-Heavy Load Racks

HIGH DENSITY

CONVEYOR

Store Fixtures and Shelving.

New line for small and medium sized stores and warehouses.